Front Components Inside Passenger Compartment Component Location (Climatronic)
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Instrument Panel
- Instrument panel with defrost air vent
- Air guide channels installed under the instrument panel
- Air guide channel assembly overview. Refer to VENTS
- For removing and installing the instrument panel, refer to REMOVAL AND INSTALLATION .
- Sunlight Photo Sensor -G107-
- Removing and Installing. Refer to SUNLIGHT PHOTO SENSOR -G107- .
- Center Air Vent
- Air ducts and air distribution in passenger compartment assembly overview. Refer to AIR DUCTS AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT OVERVIEW .
- Removing and Installing. Refer to CENTER AIR VENT .
- Right Side Window Vent
- The air distribution is activated using the defroster intermediate piece -item 10- in Figure.
- Removing and Installing. Refer to SIDE WINDOW VENTS .
- Right Side Vent
- The air distribution is activated using the intermediate piece for the air vent -item 11- in Figure.
- Removing and Installing. Refer to SIDE VENTS .
- Front A/C Display Control Head -E87- with Climatronic Control Module -J255-
- Function. Refer to DISPLAY CONTROL HEAD COMPONENT LOCATION OVERVIEW .
- Removing and Installing. Refer to DISPLAY CONTROL HEAD .
- Pin assignment for multi-pin connectors on the control module. Refer to PIN ASSIGNMENT ON BACK OF DISPLAY CONTROL HEAD (CLIMATRONIC) .
- Right Vent Temperature Sensor -G151-
- for side air vents
- Removing and Installing. Refer to LEFT VENT TEMPERATURE SENSOR -G150- .
- Fresh Air Blower -V2-
- With Fresh Air Blower Control Module -J126-
- Fresh Air Blower -V2-, removing and installing. Refer to FRESH AIR BLOWER -V2- .
- Fresh Air Blower Control Module -J126-, removing and installing. Refer to FRESH AIR BLOWER CONTROL MODULE -J126- .
- Adjusting Unit for Fresh Air/Recirculating Air/Back Pressure Door
- Removing and Installing. Refer to FRESH AIR/RECIRCULATING AIR/BACK PRESSURE DOOR ADJUSTER .
- Right Footwell Vent Temperature Sensor -G262-
- Removing and Installing. Refer to RIGHT FOOTWELL VENT TEMPERATURE SENSOR -G262- .
- Front Passenger Side Footwell Vent
- Removing and Installing. Refer to FRONT PASSENGER SIDE FOOTWELL VENT .
- Dust and Pollen Filter
- with activated charcoal insert
- Dust and pollen filter general information. Refer to DUST AND POLLEN FILTER .
- Removing and Installing. Refer to DUST AND POLLEN FILTER .
- Front Passenger Side Footwell Trim Panel
- Right Rear Vent Air Guide Channel
- Removing and Installing. Refer to REAR VENT AIR GUIDE CHANNEL .
- Condensation Water Drain
- Removing and Installing, and Checking, refer to CONDENSATION WATER DRAIN
- Evaporator Temperature Sensor -G308-
- Removing and Installing. Refer to EVAPORATOR TEMPERATURE SENSOR -G308- .
- Sealing Caps
- Only for vehicles without air ducts/air vents installed in the rear center console
- Removing and Installing. Refer to CAPS ON HEATER AND A/C UNIT .
- Left Rear Vent Air Guide Channel
- Removing and Installing. Refer to REAR VENT AIR GUIDE CHANNEL .
- Auxiliary Heater Heating Element -Z35-
- Only installed on vehicles with Diesel engine without auxiliary water heater
- Removing and installing. Refer to AUXILIARY HEATER HEATING ELEMENT -Z35- .
- Switch-on criteria. Refer to SWITCH-ON CRITERIA FOR THE ACTIVATION OF THE AUXILIARY HEATER HEATING ELEMENT -Z35-
- Switch-off criteria. Refer to SWITCH-OFF CRITERIA FOR THE ACTIVATION OF THE AUXILIARY HEATER HEATING ELEMENT -Z35-
- Left Footwell Vent Temperature Sensor -G261-
- Removing and Installing. Refer to LEFT FOOTWELL VENT TEMPERATURE SENSOR -G261- .
- Heater Core
- Removing and installing. Refer to HEATER CORE .
- After replacing heater core, replace all the coolant. Refer to ENGINE COOLANT SYSTEM , COOLING SYSTEM , COOLING SYSTEM , COOLING SYSTEM or COOLING SYSTEM .
- Driver Side Footwell Vent
- Removing and Installing. Refer to DRIVER SIDE FOOTWELL VENT .
- Left Temperature Door Motor -V158-
- with Left Temperature Door Potentiometer/Actuator -G220-
- To check, perform "Guided Fault Finding" using the Vehicle Diagnostic Tester and refer to appropriate Wiring Diagrams, Troubleshooting & Component Locations.
- Removing and Installing. Refer to LEFT TEMPERATURE DOOR MOTOR -V158- AND LEFT TEMPERATURE DOOR POTENTIOMETER/ACTUATOR -G220 - .
- Defroster Door Motor -V107-
- With the Defroster Door Motor Position Sensor -G135-
- To check, perform "Guided Fault Finding" using the Vehicle Diagnostic Tester and refer to Wiring diagrams, Troubleshooting & Component locations.
- Removing and Installing. Refer to DEFROSTER DOOR MOTOR -V107- WITH DEFROSTER DOOR MOTOR POSITION SENSOR -G135- .
- Front Air Distribution Door Motor -V426-
- with the Front Air Distribution Door Motor Position Sensor -G642-
- To check, perform "Guided Fault Finding" using the Vehicle Diagnostic Tester and refer to appropriate Wiring Diagrams, Troubleshooting & Component Locations.
- Removing and Installing. Refer to FRONT AIR DISTRIBUTION DOOR MOTOR -V426- WITH FRONT AIR DISTRIBUTION DOOR MOTOR POSITION SENSOR -G642- .
- Heater and A/C Unit
- Heater and A/C unit, removing and installing. Refer to HEATER AND A/C UNIT .
- Heater and A/C unit attachments assembly overview. Refer to HEATER AND A/C UNIT OVERVIEW (CLIMATRONIC) .
- Heater and A/C unit, disassembling and assembling. Refer to HEATER AND A/C UNIT OVERVIEW (CLIMATRONIC) .
- Evaporator housing assembly overview. Refer to EVAPORATOR HOUSING OVERVIEW .
- Right Temperature Door Motor -V159-
- with Right Temperature Door Potentiometer/Actuator -G221-
- To check, perform "Guided Fault Finding" using the Vehicle Diagnostic Tester and refer to Wiring diagrams, Troubleshooting & Component locations.
- Removing and Installing. Refer to RIGHT TEMPERATURE DOOR MOTOR -V159- AND RIGHT TEMPERATURE DOOR POTENTIOMETER/ACTUATOR -G221 - .
- Fresh Air/Recirculating Air/Back Pressure Door Motor -V425-
- With Fresh Air/Recirculating Air/Back Pressure Door Motor Position Sensor -G644-
- To check, perform "Guided Fault Finding" using the Vehicle Diagnostic Tester and refer to Wiring diagrams, Troubleshooting & Component locations.
- Removing and Installing. Refer to FRESH AIR/RECIRCULATING AIR/BACK PRESSURE DOOR MOTOR -V425- WITH FRESH AIR/RECIRCULATING AIR/BACK PRESSURE DOOR MOTOR POSITION SENSOR -G644- .
- Left Side Vent
- The air distribution is activated using the intermediate piece for the air vent -item 11- in Figure.
- Removing and Installing. Refer to SIDE VENTS .
- Left Vent Temperature Sensor -G150-
- for side air vents
- Removing and Installing. Refer to LEFT VENT TEMPERATURE SENSOR -G150- .
- Left Side Window Vent
- The air distribution is activated using the defroster intermediate piece -item 10- in Figure.
- Removing and Installing. Refer to SIDE WINDOW VENTS .