LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [DDSA, DDSB] >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Lower Timing Chain Cover, Removing And Installing >> Tightening Specifications

Tightening Specifications

Step Bolts Tightening Specification/Additional Turn
1. -1 to 15- Install by hand all the way
2. -1 to 15- 8 Nm
3. -1 to 15- 45° (turn bolts 3 and 6 an additional 45° turn after installing the vibration damper)
Fig 1: Engine Support - Tightening Specification and Sequence
GWWA10-11481Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals