Vehicles with Start/Stop System

Vehicles with the Start/Stop System have a special Battery -A- due to the increased load on the cycles.

When replacing the Battery -A-, pay attention to the replacement part identification. Refer to the Parts Information.

Batteries for vehicles with the Start/Stop System have "AGM" (Absorbent Glass Mat) or "EFB" (Enhanced Flooded Battery) marked on them.

Continuation for All Vehicles

-- Make sure the Battery -A- is secure after installing it.

-- Connect the Battery -A-. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- When the battery is replaced the Battery Monitoring Control Module -J367- must be adapted. Refer to Battery Monitoring Control Module -J367-, ADAPTING .

Tightening Specifications