Turbocharger Recirculation Valve -N249- AND Wastegate Bypass Regulator Valve -N75-

Fig 1: Turbocharger, Assembly Overview Part III

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1. Turbocharger
   • Removing and installing, refer to TURBOCHARGER .
2. Gasket
   • Always replace
3. Bolt
   • 9 Nm
4. Vent Tube
5. Heat Shield
6. Connecting Hose
7. Vacuum Diaphragm
   • Removing and installing, refer to TURBOCHARGER VACUUM DIAPHRAGM .
   • Adjusting, refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING .
8. Ring Connection
9. Seal
   • Always replace.
10. Hose
11. Hose
12. Bolt
    • 3 Nm
13. Wastegate Bypass Regulator Valve
14. Banjo Bolt
    • 8 Nm
15. Seal
    • Always replace
16. Connection
17. Securing Clip
18. Bolt
    • 7 Nm
19. Hose
20. Bolt
    • 7 Nm
21. Bracket
22. Bolt
    • 7 Nm
23. Turbocharger Recirculation Valve
    • Note the installed position, refer to Fig 2.
24. Seal

Installed Position of the Turbocharger Recirculation Valve 

Fig 2: Installation Position Of Turbocharger Recirculating Valve N249

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Note the installed position -arrows-.