EVAP System: Notes
WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
The following table provides quick links to all chapters in this article.
| EVAP SYSTEM, DETECTING LEAKS . | |
| EVAP SYSTEM, CHECKING FOR LEAKS . | |
| EVAP CANISTER PURGE REGULATOR VALVE N80, CHECKING . | |
| LEAK DETECTION PUMP V144, CHECKING . |
For all EVAP system component locations and hose routing. Refer to EVAP SYSTEM ASSEMBLY OVERVIEW , and EVAP SYSTEM OVERVIEW .
For the EVAP system hose routing. Refer to EVAP SYSTEM OVERVIEW .
For all EVAP system removal/installation procedures and torque specifications. Refer to REMOVAL AND INSTALLATION .
NOTE:
Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.