Camshaft Adjustment Valve 1 -N205-

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the charge air pipe from the noise generator, if equipped. Refer to CHARGE AIR PIPE TO NOISE GENERATOR .

Fig 1: Identifying Camshaft Adjustment Valve And Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Disconnect the connector from the camshaft adjustment valve 1 -1-.

-- Remove the bolts -arrows- and then the camshaft adjustment valve 1.

Installing

Tightening specifications, refer to TIMING CHAIN COVERS OVERVIEW .

Install in reverse order of removal. Note the following:

-- Lubricate the seal and the O-ring with engine oil.