Reverse Gear Clutch "K2" and 3rd Through 5th Gear Clutch "K3"
WARNING: This page is about a different variant/trim than selected.
Special feature: one component comprises two clutches.
Both clutches will now be disassembled for cleaning. No repairs can be made.
If one of the two clutches is faulty, both must always be replaced. Of course, then neither of the clutches needs to be disassembled and washed.
To present the work on this component clearly, the material is divided into the following three chapters:
- "K2" plates, refer to Overview - "K2" plates .
- "K3" plates, refer to "K3" plates, overview .
- "K2/K3" clutch housing, refer to "K2/K3" clutch housing, overview .