List of selectable functions
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
| Reference | ||
| 01 - | Check control module version. Refer to Performing On Board Diagnostic (OBD) | VAG 1551 Scan Tool, connecting and selecting functions |
| 02 - | Check Diagnostic Trouble Code (DTC) memory | Diagnostic Trouble Code (DTC) memory, checking |
| 04 - | Initiate basic setting | Basic setting, initiating |
| 05 - | Erase DTC memory | Diagnostic Trouble Code (DTC) memory, erasing |
| 06 - | Ending output | Ending Output |
| 08 - | Read measured value block | Measured value block, reading |
Further functions, which are printed out by pressing the HELP button, need not be considered.
The VAG 1551 Scan Tool returns to the following start position after checking each function:
Indicated on display
| Rapid data transfer HELP Select function XX |