Diagnostic Trouble Code (DTC) memory, checking
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Connect VAG 1551 Scan Tool and enter address word "02 Transmission electronics" and advance until "Select function XX" appears in display. Refer to VAG 1551 Scan Tool, connecting and selecting functions .
Indicated on display
| Rapid data transfer HELP Select function XX |
- Press buttons -0- and -2-to select "Check DTC memory" function 02.
Indicated on display
| Rapid data transfer Q 02 - Check DTC memory |
- Confirm entry with -Q- button.
The number of stored DTCs or "No DTC recognized" appears in the display.
| X DTCs recognized! |
The stored DTCs are displayed in turn and printed out.
After the last DTC has been displayed and printed out:
- Correct malfunctions as described in DTC table. Refer to Diagnostic Trouble Code (DTC) table .
- Press → button.
Indicated on display
| Rapid data transfer HELP Select function XX |
After checking the DTC memory and correcting the malfunctions:
- Erase DTC memory. Refer to Diagnostic Trouble Code (DTC) memory, erasing .