List of functions
LIST OF FUNCTIONS - FROM 09.94 AND UP
| Function | See: |
|---|---|
| 01 - Checking control module version | CHECK CONTROL MODULE VERSIONS (FUNCTION 01) |
| 02 - Checking DTC memory | CHECK DTC MEMORY (FUNCTION 02) |
| 03 - Output Diagnostic Test Mode | Output Diagnostic Test Mode (DTM) (function 03) |
| 05 - Erasing DTC memory | ERASE DTC MEMORY (FUNCTION 05) |
| 06 - Ending output | END OUTPUT (FUNCTION 06) |
| 07 - Coding control module | CODE CONTROL MODULE (FUNCTION 07) |
| 08 - Read measuring value block | Read Measuring Value Block (function 08) |
| 10 - Adaptation | N/A |
NOTE:
- A list of functions is printed out after pressing HELP button.
- Do not select further functions, which can be printed out after pressing the HELP button.
- After the function is completed VAG 1551 returns to following start position:
Indicated on display: