Check DTC Memory (function 02)

Connecting scan tool, refer to SCAN TOOL, CONNECTING VAG1551 OR VAS5051 . Initiating On Board Diagnostic (OBD), refer to AIRBAG ON BOARD DIAGNOSTIC (OBD), INITIATING .
Switch on printer with PRINT button (warning lamp in button lights up).

Indicated on display:

Fig 1: Check DTC Memory, From 09.94 And Up: Indicated On Display (1 Of 5)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Indicated on display:

Fig 2: Check DTC Memory, From 09.94 And Up: Indicated On Display (2 Of 5)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Stored DTCs appear in display.

Fig 3: Check DTC Memory, From 09.94 And Up: Indicated On Display (3 Of 5)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Stored DTCs are displayed and printed out one after another.

If "No DTC recognized" is displayed the program will return to the initial position after pressing the --> button.

Fig 4: Check DTC Memory, From 09.94 And Up: Indicated On Display (4 Of 5)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Indicated on display:

Fig 5: Check DTC Memory, From 09.94 And Up: Indicated On Display (5 Of 5)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

If something else is displayed:

See Scan Tool operating instructions
- End output (function 06), refer to END OUTPUT (FUNCTION 06) .
- Switch off ignition and disconnect Data Link Connector (DLC).

NOTE: If a malfunction is recognized: