Removal [02/2024 - ]: Procedure

Refer to PROCEDURE - Step 7

Refer to PROCEDURE - Step 9

Refer to PROCEDURE - Step 11

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Lever	-	-
   	Remove in this Direction		Push in this Direction

   1. Push the lever, detach the guide to remove the hood lock control lever sub-assembly.

Refer to PROCEDURE - Step 1

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

   1. Tie a string to the end of the hood lock control cable assembly in the cabin.

      HINT: 

      Use a length of string long enough to pass through the engine compartment.

   2. Detach the clamp.
   3. Remove the grommet as shown in the illustration.

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Detach the clamp and remove the hood lock control cable assembly.