LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical System - Service Information (1 Of 3)) >> Camshaft >> Removal [09/2022 - 11/2022] >> Procedure

Removal [09/2022 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 3 CYLINDER BLOCK INSULATOR 

    Refer to REMOVAL [09/2022 - 11/2022]

  2. REMOVE SPARK PLUG 

    Refer to REMOVAL [09/2022 - ]

  3. REMOVE OIL PRESSURE AND TEMPERATURE SENSOR 

    Refer to PROCEDURE - Step 2

  4. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side) 

    Refer to PROCEDURE - Step 1

  5. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side) 

    Refer to PROCEDURE - Step 1

  6. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  7. REMOVE WATER INLET WITH WATER PUMP HOUSING SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  8. REMOVE OIL FILLER CAP ASSEMBLY 

    Refer to PROCEDURE - Step 9

  9. REMOVE CRANKSHAFT POSITION SENSOR 

    Refer to PROCEDURE - Step 2

  10. REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 

    Refer to PROCEDURE - Step 2

  11. REMOVE VACUUM PUMP ASSEMBLY 

    Refer to PROCEDURE - Step 10

  12. REMOVE CRANKSHAFT PULLEY ASSEMBLY 

    Refer to PROCEDURE - Step 14

  13. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side) 

    Refer to PROCEDURE - Step 5

  14. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side) 

    Refer to PROCEDURE - Step 6

  15. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16

  16. REMOVE SPARK PLUG TUBE GASKET 

    Refer to PROCEDURE - Step 17

  17. REMOVE ENGINE MOUNTING BRACKET RH 

    Refer to PROCEDURE - Step 19

  18. REMOVE NO. 2 TIMING CHAIN COVER ASSEMBLY 

    Refer to PROCEDURE - Step 20

  19. REMOVE TIMING CHAIN COVER OIL SEAL 

    Refer to PROCEDURE - Step 21

  20. REMOVE TIMING CHAIN COVER ASSEMBLY 

    Refer to PROCEDURE - Step 22

  21. SET VALVE TIMING 

    Refer to PROCEDURE - Step 23

  22. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY 

    Refer to PROCEDURE - Step 24

  23. REMOVE TIMING CHAIN GUIDE 

    Refer to PROCEDURE - Step 25

  24. REMOVE DAMPER PLATE SPACER 

    Refer to PROCEDURE - Step 26

  25. REMOVE CHAIN TENSIONER SLIPPER 

    Refer to PROCEDURE - Step 27

  26. REMOVE CHAIN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28

  27. REMOVE NO. 1 CHAIN VIBRATION DAMPER 

    Refer to PROCEDURE - Step 29

  28. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET 

    Refer to PROCEDURE - Step 30

  29. REMOVE CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY 

    Refer to PROCEDURE - Step 32

  30. REMOVE CAMSHAFT TIMING GEAR ASSEMBLY 

    Refer to PROCEDURE - Step 33

  31. REMOVE FUEL PUMP LIFTER GUIDE 

    Refer to PROCEDURE - Step 34

  32. REMOVE FUEL PUMP LIFTER HOUSING 

    Refer to PROCEDURE - Step 35

  33. REMOVE CAMSHAFT POSITION SENSOR HOLDER 

    Refer to PROCEDURE - Step 36

  34. REMOVE CAMSHAFT BEARING CAP 

    Refer to PROCEDURE - Step 37

  35. REMOVE EXHAUST CAMSHAFT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 38

  36. REMOVE INTAKE CAMSHAFT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 39

scientia non olet · About LEMON Manuals