- REMOVE INSTRUMENT PANEL HOLE COVER (w/ Headup Display)
- Disengage the 5 claws and 2 guides as shown in the illustration to remove the instrument panel hole cover.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
 |
Remove in this Direction |
- REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
- Disengage the 11 clips as shown in the illustration to remove the No. 1 instrument panel garnish sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
- Disengage the 9 clips as shown in the illustration to remove the No. 2 instrument panel garnish sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
- Disengage the 4 clips as shown in the illustration to remove the No. 1 instrument panel register assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
- Disengage the 10 clips as shown in the illustration to remove the No. 2 instrument panel register assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
- Disengage the 5 clips as shown in the illustration to remove the center instrument panel register assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
|
Remove in this Direction |
- REMOVE DEFROSTER NOZZLE ASSEMBLY
- Remove the 3 screws <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 9 guides to remove the defroster nozzle assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
- Remove the 2 screws <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 guides to remove the No. 3 heater to register duct sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
- Remove the screw <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 3 guides to remove the No. 2 side defroster nozzle duct.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
- Remove the 2 screws <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 guides to remove the No. 1 heater to register duct sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
- Remove the screw <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 3 guides to remove the No. 1 side defroster nozzle duct.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE ANTENNA CORD SUB-ASSEMBLY
Refer to PROCEDURE - Step 5 [07/2020 - 10/2022]
, or refer to PROCEDURE - Step 5 [10/2022 - ]
- REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET
Refer to PROCEDURE - Step 3 [07/2020 - 10/2022]
, or refer to PROCEDURE - Step 3 [10/2022 - ]
- REMOVE NO. 2 INSTRUMENT PANEL WIRE
Refer to PROCEDURE - Step 3 [07/2020 - 10/2022]
, or refer to PROCEDURE - Step 3 [10/2022 - ]
- REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
Refer to PROCEDURE - Step 4 [07/2020 - 10/2022]
, or refer to PROCEDURE - Step 4 [10/2022 - ]
- REMOVE NO. 1 INSTRUMENT PANEL PIN
- Remove the 2 screws <C>.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Disengage the 2 guides to remove the 2 No. 1 instrument panel pins.
- REMOVE INSTRUMENT PANEL CUSHION
- Remove the instrument panel cushion.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|