LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  2. REMOVE DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 7

  3. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET 
    1. Disconnect the connector.
      GTY987759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws.
    3. Remove the 2 screws.
      GTY987763Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 guides to remove the navigation antenna assembly with bracket.
  4. REMOVE NAVIGATION ANTENNA ASSEMBLY 
    1. Disengage the 2 claws and 6 guides to remove the navigation antenna assembly as shown in the illustration.
      GTY989658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A w/o Manual (SOS) Switch *B w/ Manual (SOS) Switch
      Remove in this Direction - -
  5. REMOVE NAVIGATION ANTENNA BRACKET 
scientia non olet · About LEMON Manuals