LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Heated Oxygen Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 18

  2. REMOVE TAILPIPE ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE CENTER EXHAUST PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 4

  4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 5

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY 

    Refer to PROCEDURE - Step 6

  6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) 
    1. Using SST, remove the sensor.
      • SST: 09224-00011 
      GTY121812Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 2 HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) 
    1. Using SST, remove the sensor.
      • SST: 09224-00011 
      GTY121812Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals