LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pressure Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  2. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 17

  4. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY 
    1. GTY593084Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the sender gauge connector.

    2. GTY571679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Remove the oil pressure sender gauge.

scientia non olet · About LEMON Manuals