Installation [03/2017 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

1. Install the ECM with the 2 bolts and nut.

   Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Connect the 3 ECM connectors and rotate the 3 levers to lock them.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
   • Be sure to securely connect the ECM connectors.

Refer to PROCEDURE - Step 44 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 44 [06/2017 - 08/2018] , or refer to PROCEDURE - Step 44 [08/2018 - 03/2020] , or refer to PROCEDURE - Step 48 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 48 [10/2020 - ]

Refer to PROCEDURE - Step 45 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 45 [06/2017 - 08/2018] , or refer to PROCEDURE - Step 45 [08/2018 - 03/2020] , or refer to PROCEDURE - Step 49 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 49 [10/2020 - ]

Refer to PROCEDURE - Step 46 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 46 [06/2017 - 08/2018] , or refer to PROCEDURE - Step 46 [08/2018 - 03/2020] , or refer to PROCEDURE - Step 50 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 50 [10/2020 - ]

Refer to PROCEDURE - Step 2 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 2 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 2 [10/2020 - ]

Refer to PROCEDURE - Step 2 [03/2017 - 08/2018] , or refer to PROCEDURE - Step 2 [08/2018 - ]

Refer to PRECAUTION [03/2017 - 06/2017] , or refer to PRECAUTION [06/2017 - 03/2020] , or refer to PRECAUTION [03/2020 - 10/2020] , or refer to PRECAUTION [10/2020 - ]