LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (Service Information) (Except Hybrid) >> Front Seat Side Airbag Assembly >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY 
    1. Install the front seat airbag assembly with 2 new nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      WARNING:
      • The nuts must not be reused.
      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.
    2. Engage the 2 clamps.
  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD 

    For Manual Seat:

    Refer to PROCEDURE - Step 21 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 21 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 23 (11/2016 -)

    For Power Seat:

    Refer to PROCEDURE - Step 25 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 25 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 28 (11/2016 -)

  3. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY 

    For Manual Seat:

    Refer to PROCEDURE - Step 22 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 22 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 24 (11/2016 -)

    For Power Seat:

    Refer to PROCEDURE - Step 26 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 26 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 29 (11/2016 -)

  4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    For Manual Seat:

    Refer to PROCEDURE - Step 23 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 23 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 25 (11/2016 -)

    For Power Seat:

    Refer to PROCEDURE - Step 27 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 27 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 30 (11/2016 -)

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) 

    For Driver Side:

    Refer to PROCEDURE - Step 27 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 27 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 29 (11/2016 -)

    For Front Passenger Side:

    Refer to PROCEDURE - Step 28 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 28 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 30 (11/2016 -)

  6. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat) 

    For Driver Side:

    Refer to PROCEDURE - Step 37 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 37 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 40 (11/2016 -)

    For Front Passenger Side:

    Refer to PROCEDURE - Step 38 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 38 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 41 (11/2016 -)

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 34 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 34 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 37 (11/2016 -)

  8. INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat) 

    For Driver Side:

    Refer to PROCEDURE - Step 29 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 29 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 31 (11/2016 -)

    For Front Passenger Side:

    Refer to PROCEDURE - Step 30 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 30 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 32 (11/2016 -)

  9. INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat) 

    For Driver Side:

    Refer to PROCEDURE - Step 35 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 35 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 38 (11/2016 -)

    For Front Passenger Side:

    Refer to PROCEDURE - Step 36 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 36 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 39 (11/2016 -)

  10. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side Manual Seat) 

    Refer to PROCEDURE - Step 31 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 31 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 33 (11/2016 -)

  11. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) 

    Refer to PROCEDURE - Step 32 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 32 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 34 (11/2016 -)

  12. CONNECT SEPARATE TYPE FRONT SEATBACK COVER 

    For Manual Seat:

    Refer to PROCEDURE - Step 33 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 33 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 35 (11/2016 -)

    For Power Seat without Climate Control Seat System:

    Refer to PROCEDURE - Step 39 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 39 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 42 (11/2016 -)

    For Power Seat with Climate Control Seat System:

    Refer to PROCEDURE - Step 40 (12/2013 - 11/2015)

    Refer to PROCEDURE - Step 40 (11/2015 - 11/2016)

    Refer to PROCEDURE - Step 43 (11/2016 -)

  13. INSTALL FRONT SEAT ASSEMBLY 

    For Manual Seat: Refer to INSTALLATION [12/2013 - ]

    For Power Seat: Refer to INSTALLATION [12/2013 - ]

  14. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [12/2013 - ]

scientia non olet · About LEMON Manuals