LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) (Except Hybrid) >> Satellite Radio Tuner >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL STEREO COMPONENT TUNER ASSEMBLY 
  2. INSTALL NO. 1 NAVIGATION WIRE 
    1. Connect each connector to install the No. 1 navigation wire.
  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. INSTALL NO. 2 RADIO RECEIVER BRACKET 

    See step  5

  5. INSTALL NO. 1 RADIO RECEIVER BRACKET 

    See step  6

  6. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    See step  7

  7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type) 

    See step  8

  8. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type) 

    Refer to PROCEDURE - Step 8

  9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 5

  10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8 Refer to PROCEDURE - Step 8

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Navigation Receiver Type) 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [10/2014 - 10/2015] Refer to INITIALIZATION [10/2015 - ] )

scientia non olet · About LEMON Manuals