Removal [10/2014 - ]: Procedure
- REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Refer to PROCEDURE - Step 1 Refer to PROCEDURE - Step 1
- REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Refer to PROCEDURE - Step 4
- REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
- Remove the 4 bolts.
- Disconnect the connector.
- Pull the radio and display receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 4 clips.
- Disconnect each connector and remove the radio and display receiver assembly with air conditioning control assembly.
- Remove the 4 bolts.
- REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
- REMOVE NO. 1 RADIO RECEIVER BRACKET
- REMOVE NO. 2 RADIO RECEIVER BRACKET
- REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Refer to PROCEDURE - Step 10
- REMOVE NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
See step 11
- REMOVE STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)
- REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY