LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information >> Front Bumper >> Removal [08/2020 - 08/2021] >> Procedure

Removal [08/2020 - 08/2021]: Procedure

  1. REMOVE UPPER RADIATOR SUPPORT SEAL 

    Refer to PROCEDURE - Step 18

  2. REMOVE FRONT BUMPER COVER 
    1. Apply protective tape as shown in the illustration.
      GTY845814Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Remove the 3 screws.
      GTY924823Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 screws and 2 bolts.
      GTY924822Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 3 bolts.
      GTY924776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the 6 clips.
      GTY924775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Disengage the 7 claws as shown in the illustration.

      HINT: 

      Use the same procedure for the RH side and LH side.

      GTY869782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    7. Disconnect the 2 connectors.
    8. Remove the front bumper cover.
  3. REMOVE UPPER CENTER FRONT BUMPER RETAINER 

    Refer to PROCEDURE - Step 11

  4. REMOVE FRONT BUMPER LOWER COVER 
    1. Remove the clip, 5 bolts and front lower bumper cover.
      GTY437821Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE RADIATOR SIDE DEFLECTOR LH 

    Refer to PROCEDURE - Step 13

  6. REMOVE RADIATOR SIDE DEFLECTOR RH 

    Refer to PROCEDURE - Step 12

  7. REMOVE FRONT BUMPER ENERGY ABSORBER 
    1. Remove the front bumper energy absorber.
      GTY441091Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY 
    1. Remove the 6 nuts, screw and front bumper reinforcement sub-assembly.
      GTY441090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH 
    1. Remove the 4 bolts and No. 2 front bumper extension sub-assembly LH.
      GTY230360Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  11. REMOVE FRONT BUMPER SIDE SUPPORT LH 
    1. Remove the bolt and screw.
      GTY441088Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws to remove the front bumper side support LH.
  12. REMOVE FRONT BUMPER SIDE SUPPORT RH 

    HINT: 

    Use the same procedure as for the LH side.

  13. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH 
    1. Remove the 2 bolts and front bumper bracket sub-assembly LH.
      GTY441087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals