Removal (To 12/2010): Removal
- PRECAUTION WARNING:
Be sure to read the "PRECAUTION" thoroughly before servicing. Refer to PRECAUTION .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL WARNING:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
- REMOVE FRONT DOOR SCUFF PLATE LH . Refer to REMOVAL - Step 18
- REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH . Refer to REMOVAL - Step 20
- REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
- REMOVE INSTRUMENT PANEL FINISH PANEL LOWER LH . Refer to REMOVAL - Step 22
- REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
- Remove the 4 bolts and the driver side knee airbag assembly.
- Disconnect the connector from the driver side knee airbag assembly.NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
- INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY