LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat (Except Hybrid) >> Lumbar Support Adjuster Assembly >> Installation

Lumbar Support Adjuster Assembly: Installation

  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Install the lumbar support adjuster assembly with the 2 screws.
    2. Connect the connector.
  2. INSTALL FRONT SEATBACK COVER WITH PAD  (See INSTALLATION )
  3. INSTALL FRONT SEAT CUSHION INNER SHIELD  (See INSTALLATION )
    Fig 1: Identifying Lumbar Support Adjuster Assembly And Screws
    G05421554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY  (See INSTALLATION )
  5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY  (See INSTALLATION )
  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  (See INSTALLATION )
  7. INSTALL RECLINING POWER SEAT SWITCH KNOB  (See INSTALLATION )
  8. INSTALL FRONT SEAT ASSEMBLY  (See INSTALLATION )
  9. INSTALL REAR INNER SEAT TRACK COVER  (See INSTALLATION )
  10. INSTALL REAR OUTER SEAT TRACK COVER  (See INSTALLATION )
  11. INSTALL FRONT INNER SEAT TRACK COVER  (See INSTALLATION )
  12. INSTALL FRONT OUTER SEAT TRACK COVER  (See INSTALLATION )
  13. INSTALL FRONT SEAT HEADREST ASSEMBLY  (See INSTALLATION )
  14. INSPECT FRONT SEAT ASSEMBLY  (See INSTALLATION )
  15. INSPECT SRS WARNING LIGHT 

    (See INSTALLATION )

scientia non olet · About LEMON Manuals