LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt (Except Hybrid) >> Front Seat Inner Belt Assembly >> Installation

Front Seat Inner Belt Assembly: Installation

  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) 
    1. Install the front seat inner belt assembly with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
    2. Connect each connector and clamp.
      Fig 1: Identifying Front Seat Inner Belt Assembly (Power Seat) With Nut
      G05419412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) 
    1. Install the front seat inner belt assembly with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
    2. Connect each connector and clamp.
  3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)  (See INSTALLATION )
  4. INSTALL REAR INNER SEAT TRACK COVER (for Power Seat)  (See INSTALLATION )
  5. INSTALL REAR OUTER SEAT TRACK COVER (for Power Seat)  (See INSTALLATION )
    Fig 2: Identifying Front Seat Inner Belt Assembly (Manual Seat) With Nut
    G05419413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL FRONT INNER SEAT TRACK COVER (for Power Seat)  (See INSTALLATION )
  7. INSTALL FRONT OUTER SEAT TRACK COVER (for Power Seat)  (See INSTALLATION )
  8. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Power Seat)  (See INSTALLATION )
  9. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)  (See INSTALLATION )
  10. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat)  (See INSTALLATION )
  11. INSTALL REAR SEAT TRACK COVER (for Manual Seat)  (See INSTALLATION )
  12. INSTALL FRONT INNER SEAT TRACK COVER (for Manual Seat)  (See INSTALLATION )
  13. INSTALL FRONT OUTER SEAT TRACK COVER (for Manual Seat)  (See INSTALLATION )
  14. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)  (See INSTALLATION )
  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat) 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  16. INSPECT FRONT SEAT ASSEMBLY (for Power Seat)  (See INSTALLATION )
  17. INSPECT FRONT SEAT ASSEMBLY (for Manual Seat)  (See INSTALLATION )
  18. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag) 

    (See DIAGNOSIS SYSTEM )

scientia non olet · About LEMON Manuals