LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Hazard Warning Switch >> Removal

Hazard Warning Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  2. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY  (See REMOVAL )
  3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  5. REMOVE RADIO RECEIVER ASSEMBLY (w/o Multi-display)  (See REMOVAL )
  6. REMOVE HAZARD WARNING SWITCH 
    1. Detach the 2 claws and remove the hazard warning switch.
      Fig 1: Identifying Hazard Warning Switch With Claws
      G05637187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals