Back Door Glass: Installation

PRECAUTION (See INSTALLATION )
INSTALL BACK DOOR GLASS
1. Install the back door glass with the 4 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 72 in.*lbf)
  
  Fig 1: Identifying Back Door Glass Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK WINDOW STAY ASSEMBLY LH (for Glass Hatch Type) (See INSTALLATION )
INSTALL BACK WINDOW STAY ASSEMBLY RH (for Glass Hatch Type)
HINT:

Use the same procedure for the RH side and the LH side.
INSTALL REAR SPOILER SUB-ASSEMBLY (See INSTALLATION )
INSTALL BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type) (See REASSEMBLY )
INSTALL REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type) (See INSTALLATION )
INSTALL REAR WIPER MOTOR ASSEMBLY (for Glass Hatch Type) (See INSTALLATION )
INSTALL REAR WIPER MOTOR GROMMET (for Fixed Glass Type) (See INSTALLATION )
INSTALL REAR WIPER LINK PIVOT (for Glass Hatch Type) (See INSTALLATION )
INSTALL REAR WIPER LINK CAP (for Glass Hatch Type) (See INSTALLATION )
INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (for Fixed Glass Type) (See INSTALLATION )
INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (for Glass Hatch Type) (See INSTALLATION )
INSTALL REAR WIPER ARM HEAD CAP (See INSTALLATION )
INSTALL REAR WIPER SHAFT COVER (for Glass Hatch Type) (See INSTALLATION )
INSTALL BACK DOOR TRIM PANEL ASSEMBLY (See REASSEMBLY )
INSTALL ASSIST STRAP ASSEMBLY (See REASSEMBLY )
INSTALL ASSIST STRAP HOLE COVER (See REASSEMBLY )
INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type) (See REASSEMBLY )
INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door) (See REASSEMBLY )
INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door) (See REASSEMBLY )
CONNECT POWER BACK DOOR ROD (w/ Power Back Door) (See REASSEMBLY )
INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door) (See REASSEMBLY )
INSTALL BACK DOOR TRIM COVER RH (See REASSEMBLY )
INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY (See REASSEMBLY )