(Door / Hatch) (Except Hybrid): Hood: Reassembly

CONNECT WASHER HOSE ASSEMBLY
1. Connect the washer hose assembly.
  
  Fig 1: Identifying Washer Hose Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADJUST WASHER NOZZLE SUB-ASSEMBLY (See ADJUSTMENT )
INSTALL WASHER NOZZLE SUB-ASSEMBLY (See INSTALLATION )
INSTALL HOOD INSULATOR
1. Install the hood insulator with the 8 clips.
  
  Fig 2: Identifying Hood Insulator Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD TO RADIATOR SUPPORT SEAL
1. Install the hood to radiator support seal with the 8 clips.
  
  Fig 3: Identifying Hood To Radiator Support Seal Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SEAL SUB-ASSEMBLY
1. Clean the vehicle body surface.
  1. Wipe off any tape adhesive residue with cleaner.
2. Remove the release paper from the radiator seal sub-assembly.
  HINT:
  
  After removing the release paper, keep the exposed adhesive free from foreign matter.
3. Install a new radiator seal sub-assembly with the 2 clips.
4. Install the 6 clips.
  
  Fig 4: Identifying Radiator Seal Sub-Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT HOOD PROTECTOR
1. Engage the 4 claws and install the front hood protector.
  
  Fig 5: Identifying Front Hood Protector Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY (See ON-VEHICLE INSPECTION )