LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System (Except Hybrid) >> Washer Nozzle >> Installation

Washer Nozzle: Installation

  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY 
    1. Connect a new washer nozzle sub-assembly to the washer hose.
      Fig 1: Identifying Washer Hose
      G04980289Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws and install the washer nozzle sub-assembly as shown below.
      Fig 2: Identifying Washer Nozzle Sub-Assembly Claws
      G05420059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals