HIGH MOUNTED STOP LIGHT ASSEMBLY (for Rear Spoiler Without Press Line): Installation
- PRECAUTION
NOTE:
- Be sure to use the centering jig when removing and installing the rear wiper motor assembly (for Glass Hatch Type). Failure to do so will result in a change of the location of the axis of the rear wiper motor assembly (for Glass Hatch Type), causing the wiping angle to change.
- After installing the rear wiper motor assembly (for Glass Hatch Type), do not open the glass hatch before installing the rear wiper link pivot.
- If the rear wiper motor assembly is removed without using the centering jig, the rear wiper motor assembly must be replaced with a new one.
- INSTALL CENTER STOP LIGHT ASSEMBLY
- Connect the connector.
- Connect the center stop light assembly to the rear spoiler sub-assembly.
- Install the center stop light assembly with the 2 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL REAR SPOILER SUB-ASSEMBLY
(See INSTALLATION
)
- INSTALL BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)
(See REASSEMBLY
)
- INSTALL REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type)
(See INSTALLATION
)
- INSTALL REAR WIPER MOTOR ASSEMBLY (for Glass Hatch Type)
(See INSTALLATION
)
- INSTALL REAR WIPER LINK PIVOT (for Glass Hatch Type)
(See INSTALLATION
)
- INSTALL REAR WIPER MOTOR GROMMET (for Fixed Glass Type)
(See INSTALLATION
)
- INSTALL REAR WIPER LINK CAP (for Glass Hatch Type)
(See INSTALLATION
)
- INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
(See INSTALLATION
)
- INSTALL REAR WIPER ARM HEAD CAP
(See INSTALLATION
)
- INSTALL REAR WIPER SHAFT COVER (for Glass Hatch Type)
(See INSTALLATION
)
- INSTALL BACK DOOR TRIM PANEL ASSEMBLY
(See REASSEMBLY
)
- INSTALL ASSIST STRAP ASSEMBLY
(See REASSEMBLY
)
- INSTALL ASSIST STRAP HOLE COVER
(See REASSEMBLY
)
- INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)
(See REASSEMBLY
)
- INSTALL BACK DOOR TRIM COVER RH
(See REASSEMBLY
)
- INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door)
(See REASSEMBLY
)
- INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door)
(See REASSEMBLY
)
- CONNECT POWER BACK DOOR ROD (w/ Power Back Door)
(See REASSEMBLY
)
- INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)
(See REASSEMBLY
)
- INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY
(See REASSEMBLY
)