WASHER MOTOR (for Sedan): Removal
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE FRONT SPOILER COVER (w/ Front Spoiler) (See REMOVAL )
- REMOVE FRONT BUMPER COVER (See REMOVAL )
- REMOVE HEADLIGHT ASSEMBLY RH (See REMOVAL )
- DRAIN WASHER FLUID
- Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.
- REMOVE WINDSHIELD WASHER JAR ASSEMBLY
- w/ Washer Level Warning Switch
- Disconnect the 2 harness clamps.
- Disconnect the 2 connectors.
- Remove the 2 bolts.
- Remove the windshield washer jar.
- w/o Washer Level Warning Switch
- Disconnect the 2 harness clamps.
- Disconnect the connector.
- Remove the 2 bolts.
- Remove the windshield washer jar.
- w/ Washer Level Warning Switch
- REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
- Pull the washer motor and pump out of the packing of the washer jar.