WASHER MOTOR (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
1. Install the windshield washer motor and pump onto the packing of the washer jar.
  
  Fig 1: Identifying Windshield Washer Motor And Pump Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WASHER JAR ASSEMBLY
1. Install the windshield washer jar.
  
  Fig 2: Identifying Windshield Washer Jar Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. w/ Washer Level Warning Switch
  1. Install the 2 bolts.
    Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
    
    Fig 3: Identifying Windshield Washer Jar Assembly Bolts (W/Washer LEvel Warning Switch)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Connect the 2 connectors.
  3. Connect the 2 harness clamps.
3. w/o Washer level warning switch
  1. Install the 2 bolts.
    Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  2. Connect the connector.
  3. Connect the 2 harness clamps.
FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
1. Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.
INSTALL HEADLIGHT ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT BUMPER COVER (See INSTALLATION )
INSTALL FRONT SPOILER COVER (w/ Front Spoiler) (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)