HEADLIGHT ASSEMBLY (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEADLIGHT ASSEMBLY
1. Connect the 2 connectors.
2. Install the headlight with the 2 screws and the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  (for bolt)
  
  Fig 1: Locating Headlight Screws And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER COVER INSTALLATION
INSTALL FRONT SPOILER COVER (w/ Front Spoiler) INSTALLATION
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )
PREPARE FOR HEADLIGHT AIMING (for Using a Screen) (See ADJUSTMENT )
INSPECT HEADLIGHT AIMING (See ADJUSTMENT )
ADJUST HEADLIGHT AIMING (See ADJUSTMENT )