LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Tire And Wheel) >> Tire Pressure Warning Ecu >> Installation

Tire Pressure Warning Ecu: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TIRE PRESSURE WARNING ECU 
    1. Install the ECU with the bolt.

      Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

      2. Fig 1: Locating Bolt
      G05584954Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. REGISTER TRANSMITTER ID  (See REGISTRATION  )
  5. INSPECT TIRE PRESSURE WARNING SYSTEM 
scientia non olet · About LEMON Manuals