Clutch Pedal: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE BRAKE BOOSTER ASSEMBLY (See REMOVAL )
REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER (for Hatchback) (See REMOVAL )
REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER (for Sedan) (See REMOVAL )
REMOVE CLUTCH RESERVOIR TUBE (See REMOVAL )
DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE (See REMOVAL )
REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 (See REMOVAL )
REMOVE CLUTCH MASTER CYLINDER ASSEMBLY (See REMOVAL )
REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
1. Disconnect the wire harness clamp.
2. Disconnect the clutch start switch connector.
3. Remove the bolt and clutch pedal support.
  
  Fig 1: Locating Clutch Pedal Support Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH START SWITCH ASSEMBLY
1. Remove the nut and clutch start switch.
  
  Fig 2: Locating Clutch Start Switch Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH PEDAL STOPPER BOLT
1. Loosen the lock nut and remove the clutch pedal stopper bolt.
  
  Fig 3: Locating Clutch Pedal Stopper Bolt & Lock Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH PEDAL SPRING
REMOVE CLUTCH PEDAL SUB-ASSEMBLY
1. Remove the bolt and the nut.
2. Remove the clutch pedal from the clutch pedal support.
  
  Fig 4: Locating Clutch Pedal Bolt & Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH PEDAL PAD
REMOVE CLUTCH PEDAL BUSH
1. Remove the 2 bushes from the clutch pedal.
2. Remove the collar from the clutch pedal.
  
  Fig 5: Identifying Clutch Pedal Bush & Collar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH PEDAL NO.1 CUSHION
1. Remove the clutch pedal No. 1 cushion from the clutch pedal.
  
  Fig 6: Removing Clutch Pedal No. 1 Cushion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002