POWER OUTLET SOCKET (for Sedan): Removal
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE INSTRUMENT PANEL FINISH LOWER CENTER PANEL (See REMOVAL )
- REMOVE SHIFT LEVER KNOB (for Manual Transaxle) (See REMOVAL )
- REMOVE CONSOLE UPPER FRONT PANEL SUB-ASSEMBLY (See REMOVAL )
- REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See REMOVAL )
- REMOVE POWER OUTLET SOCKET
- Using a screwdriver, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.
- Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
- REMOVE POWER OUTLET SOCKET COVER
- Disengage the 2 claws and remove the power outlet socket cover.