POWER OUTLET SOCKET (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER OUTLET SOCKET COVER
1. Engage the 2 claws and install a new power outlet socket cover.
  
  Fig 1: Identifying New Power Outlet Socket Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POWER OUTLET SOCKET
1. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.
2. Securely engage the claw.
Fig 2: Identifying Power Outlet Socket
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE UPPER FRONT PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SHIFT LEVER KNOB (for Manual Transaxle) (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH LOWER CENTER PANEL (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)