CIGARETTE LIGHTER ASSEMBLY (for Sedan): Removal
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See REMOVAL )
- REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See REMOVAL )
- REMOVE CONSOLE UPPER FRONT PANEL SUB-ASSEMBLY (See REMOVAL )
- REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See REMOVAL )
- REMOVE CIGARETTE LIGHTER KNOB
- Remove the cigarette lighter knob.
- REMOVE CIGARETTE LIGHTER COVER
- Using a screwdriver, disengage the claw, then turn the cigarette lighter socket counterclockwise and push the cigarette lighter socket half way out.
- Align the protrusion of the cigarette lighter socket with the cutout of the cigarette lighter indicator lens and then push out the cigarette lighter socket.
- Disengage the 2 claws and remove the cigarette lighter cover.
- REMOVE CIGARETTE LIGHTER INDICATOR LENS
- Disengage the 2 claws and remove the cigarette lighter indicator lens.