CIGARETTE LIGHTER ASSEMBLY (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CIGARETTE LIGHTER INDICATOR LENS
1. Engage the 2 claws and install a new cigarette lighter indicator lens.
  
  Fig 1: Installing New Cigarette Lighter Indicator Lens With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CIGARETTE LIGHTER COVER
1. Engage the 2 claws and install the cigarette lighter cover.
  
  Fig 2: Identifying Cigarette Lighter Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the protrusion of the cigarette lighter socket with the cutout of the cigarette lighter indicator lens and install the cigarette lighter socket.
3. Securely engage the claw.
  
  Fig 3: Installing Cigarette Lighter Socket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CIGARETTE LIGHTER KNOB
1. Install the cigarette lighter knob.
Fig 4: Installing Cigarette Lighter Knob
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE UPPER FRONT PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SHIFT LEVER KNOB (for Manual Transaxle) (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH LOWER CENTER PANEL (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)