LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Air Conditioning) >> Heater Blower Motor Relay >> Installation

Heater Blower Motor Relay: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEATER BLOWER MOTOR RELAY 
    1. Install the heater blower motor relay.
  2. INSTALL INSTRUMENT PANEL BOX (for Hatchback)  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL BOX (for Sedan)  (See INSTALLATION )
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    Fig 1: Removing Heater Blower Motor Relay
    G04829869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002