LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Air Conditioning) >> Ambient Temperature Sensor >> Removal

Ambient Temperature Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT BUMPER COVER (for Hatchback)  REMOVAL 
  3. REMOVE FRONT SPOILER COVER (for Sedan)  REMOVAL 
  4. REMOVE FRONT BUMPER COVER (for Sedan)  REMOVAL 
  5. REMOVE AMBIENT TEMPERATURE SENSOR 
    1. Disconnect the connector.
    2. Disengage the clamp and remove the ambient temperature sensor.
      Fig 1: Removing Ambient Temperature Sensor
      G04829862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002