Ambient Temperature Sensor: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL AMBIENT TEMPERATURE SENSOR
1. Engage the clamp and install the ambient temperature sensor.
2. Connect the connector.
  
  Fig 1: Removing Ambient Temperature Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER COVER (for Hatchback) (See INSTALLATION )
INSTALL FRONT BUMPER COVER (for Sedan) INSTALLATION
INSTALL FRONT SPOILER COVER (for Sedan) INSTALLATION
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)