Tire Pressure Warning Reset Switch: Installation

INSTALL TIRE PRESSURE WARNING RESET SWITCH
1. Engage the 2 claws to install the tire pressure warning reset switch.
  
  Fig 1: Identifying Claws On Lower Instrument Panel Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER INSTRUMENT PANEL SUBASSEMBLY (for TMC Made) (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL SUBASSEMBLY (for TMMK Made) (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE RH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INITIALIZE SYSTEM
NOTE: Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.

HINT:

(See INITIALIZATION )
INSPECT TIRE PRESSURE WARNING SYSTEM
HINT:

(See TEST MODE PROCEDURE )