LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> Stop Light Switch >> Removal

Stop Light Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System)  (See REMOVAL )
  6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System)  (See REMOVAL )
  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL  (See REMOVAL )
  8. REMOVE COMBINATION METER  (See REMOVAL )
  9. REMOVE STOP LIGHT SWITCH 
    1. Disconnect the stop light switch assembly connector from the stop light switch assembly.
      Fig 1: Locating Stop Light Switch Assembly Connector
      G04978444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.
      Fig 2: Removing Stop Light Switch Assembly
      G04978445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals