LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (Hybrid) >> Occupant Classification Ecu >> Removal

Occupant Classification Ecu: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (See PRECAUTION  ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
  3. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)  (See DISASSEMBLY )
  4. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)  (See DISASSEMBLY )
  5. REMOVE OCCUPANT CLASSIFICATION ECU 
    Fig 1: Removing Occupant Classification ECU
    G05242863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 2 connectors from the occupant classification ECU.
    2. Using a screwdriver, remove the occupant classification ECU.
scientia non olet · About LEMON Manuals