LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Hybrid) >> License Plate Light Assembly >> Removal

License Plate Light Assembly: Removal

  1. REMOVE ASSIST STRAP HOLE COVER  (See DISASSEMBLY )
  2. REMOVE ASSIST STRAP ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY  (See DISASSEMBLY )
  4. REMOVE BACK DOOR HANDLE ASSEMBLY OUTSIDE  (See ADJUSTMENT )
  5. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE  (See INSTALLATION )
  6. REMOVE LICENSE PLATE LIGHT ASSEMBLY 
    1. Remove the 4 screws and remove the license plate light assembly.
      Fig 1: Identifying License Plate Light Assembly With Screws
      G05243143Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals