Back Door Garnish: Removal

REMOVE ASSIST STRAP HOLE COVER (See DISASSEMBLY )
REMOVE ASSIST STRAP ASSEMBLY (See DISASSEMBLY )
REMOVE BACK DOOR TRIM PANEL ASSEMBLY (See DISASSEMBLY )
REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
1. Disconnect the license plate light connector.
2. Remove the 2 bolts and 3 nuts.
3. Remove the 2 clips and the luggage compartment door garnish sub-assembly outside.
  
  Fig 1: Removing Luggage Compartment Door Garnish Sub-Assembly Outside Clips, Bolts And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the license plate light harness and remove the luggage compartment door garnish sub-assembly outside.
  
  Fig 2: Removing Luggage Compartment Door Garnish Sub-Assembly Outside
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LICENSE PLATE LIGHT ASSEMBLY (See REMOVAL )