Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS SPECIFICATIONS
| The monitor will run whenever the following DTCs are not present | See LIST OF DISABLE A MONITOR |
| Engine condition | Running |
| Time after engine start | 120 sec. or more |
| Fuel system status | Closed Loop |
| A/F sensor status | Activated |
| Idle | OFF |
| Time after idle OFF | 2 sec. or more |
| Engine RPM | 1,400 to 3,200 rpm |
| Vehicle speed | 60 to 120 km/h (37 to 75 mph) |
| Fuel cut | OFF |
| Time after fuel cut is OFF | 2 sec. or more |
| Driving record for 20 sec. or more | 40 km/h (25 mph) or more and 900 rpm or more |