Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS SPECIFICATIONS
| The monitor will run whenever the following DTCs are not present | See LIST OF DISABLE A MONITOR |
| Accumulated time that the following conditions are met | 30 sec. |
| Battery voltage | 11 V or more |
| IAT | -10°C (14°F) or more |
| Idle | OFF |
| MAF | 8 to 35 g/ sec. |
| RPM | Less than 4,500 rpm |
| ECT | 75°C (167°F) or more |
| Estimated catalyst temperature | 550 to 910°C (1,022 to 1,652°F) |
| Fuel system status | Closed Loop |
| A/F sensor voltage | 3 to 3.5 V |