Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS SPECIFICATIONS
| The monitor will run whenever the following DTCs are not present | See LIST OF DISABLE A MONITOR |
| Battery voltage | 8 V more |
| Engine RPM | 400 rpm to allowable RPM limit |
| All of following (a), and (c) are met | |
| (a) ECT | -10°C (14°F) or more |
| (b) Either of following conditions are met | |
| IAT: -10%C (14°F) or more | |
| ECT: 75°C (167°F) or more | |
| (c) Either of following condition are met | |
| ECT (at engine start): More than -7°C (19°F) | |
| ECT: More than 20°C (68°F) | |
| MAF | 0.172 g/rev or more (Varies with ECT and RPM) |
| TP | Not changing rapidly |